XCP Motorcycle

XCP Rust Blocker

XCP Rust Blocker is designed for use on metal parts and surfaces. Treat the relevant area with a uniform coating by spraying, brushing, wiping or dipping. Wipe off excess liquid. In the case of wanting to keep shiny surfaces shiny, the product can be buffed down. Don’t worry, a protective film will still be there! Allow the product to dry to a soft film. Drying time will vary depending on the thickness of coating applied and environmental conditions. Repeat as necessary. Repeat application may be required after cleaning or significant abrasion of the treated area. Make sure you DO NOT apply to brakes!

XCP Rust Blocker Clear Coat

Exposed metal surfaces, including engine components, suspension units, undercarriage, box sections, chrome, chains, electrical connections, motors, shafts, spindles, as well as tools and equipment for shipping and storage, and many more! Provides excellent aluminium protection against galvanic corrosion.

XCP Chain Lubricant

Apply XCP Chain Lubricant sparingly and evenly to the clean chain, and ensure that excess liquid is wiped off. Ideally the chain will also be warm. Due to the excellent penetration and flow properties of XCPTM Chain Lubricant, be aware that a little goes a long way. Over applying will only lubricate your garage floor! Rotate wheel to assist flow and penetration into links and sprockets. For best results, leave overnight before use.

Due to the non-sticky nature of XCP Chain Lubricant, you will find that cleaning the chain will get much easier as time goes on. Unlike other chain lubes, XCP Chain Lubricant dries to a non-sticky film that will not attract and retain dirt to the same extent as others do. Keep using XCP Chain Lubricant and you will find chain cleaning will become much easier when maintenance time comes around!

XCP Cleaner & Degreaser

Award winning, high performance cleaning & degreasing spray. Water based and biodegradable. Safe to use on metals, paints and coatings. Use it neat as a degreaser, or dilute it for use as a bike wash or general purpose cleaner. Cuts easily through oil, dirt, grease and grime! Available in reusable 1 ltr trigger bottle and in our 5 ltr eco-refill pouch

Use as a degreaser

1. Apply product neat to the surface that requires degreasing. The liquid can also be used as a degreasing soak (bath) for a few minutes, before cleaning off.
2. Agitate with brush or sponge.
3. Rinse with clean water.
4. (Optional) Lubricate and/or protect surfaces with your preferred XCP Professional spray, as necessary.

Use as a cleaner

1. Dilute 1 part XCP CLEANER & DEGREASER with up to 10 parts water (select according to strength of cleaning power).
2. Spray surfaces with diluted mix and allow to soak for a few minutes.
3. Agitate with brush or sponge.
4. Rinse with clean water.
5. (Optional) Lubricate and/or protect surfaces with your preferred XCP Professional spray, as necessary.

XCP ONE

XCP ONE is designed for use with metal parts and surfaces. Treat the relevant area with XCP ONE and allow the product to take effect, ensuring excess liquid is wiped off. Repeat as necessary. If used on coated and/or non-metal surfaces and parts, test on an inconspicuous area first. Caution: disconnect any live electrical sources before spraying.

XCP Universal Parts Cleaner

Spray the chain with XCP Universal Parts Cleaner and allow the product to take effect, ensuring excess liquid is wiped off. Take precautions to avoid overspray. For heavily soiled chains, use the chain brush supplied to agitate the dirt. Repeat this process as necessary until the chain is clean. If a sticky lubricant has been used previously, take your time to complete this stage until the chain is completely clean. It will pay off in the long run!